Top
Ignition Kokusan EVO 2 Plus 6V Puch
Ignition Kokusan EVO 2 Plus 6V Puch Ignition Kokusan EVO 2 Plus 6V Puch Ignition Kokusan EVO 2 Plus 6V Puch

Ignition Kokusan EVO 2 Plus 6V Puch

Special Price DKK 1,318.13
Regular Price DKK 1,474.12
Always fast shipping!
In stock
SKU
110-C-PM6581
  • Electronic Ignition
  • Kokusan EVO 2 PLUS
  • Fits on Puch Mopeds
  • Clockwise & Counterclockwise to use
  • 6 Volt

    Comes with;
  • Stator / Base plate
  • Flywheel
  • Voltage regulator
  • Coil / CDi-Unit
  • Wiring harness

    Fits on;
  • Puch Maxi
  • Puch Z50 / ZA50
  • Puch Monza
  • Puch X30 / X40

  • See images for sizes

  • Mounting tips:
    - The black wire of the CDI Unit must make a ground/mass connection with the engine block. This can be done directly (preferably) or indirectly via the frame.
    - With Zundapp, among others, the engine doesn't have a ground/mass connection with the frame, because it's mounted in rubbers. Therefore add an additional ground wire between the block and the frame.
    - With ground/mass connections to the frame, the mounting point must always be made bare/blank.

  • Additional Warranty Information
  • Normally there is no warranty on electronic parts.
  • In the unlikely event that this product does not work, it can only be returned with the following conditions:
  • Still new, never worked. If it has worked for a number of weeks, there is no guarantee.
  • In original packaging, complete as delivered.
  • With the original cables.
  • Ignitions with cut / added / soldered cables are not accepted

  • Why these warranty rules?
  • We and a number of regular customers test a lot of these ignitions. "Out of the Box" they all work.
  • It often goes wrong with the mass, wrong connection.
  • Check whether the spark plug sparks, if the spark plug makes no mass, ignition coil is immediately broken and so on.
  • Hence these rules.
  • Electronic Ignition
  • Kokusan EVO 2 PLUS
  • Fits on Puch Mopeds
  • Clockwise & Counterclockwise to use
  • 6 Volt

    Comes with;
  • Stator / Base plate
  • Flywheel
  • Voltage regulator
  • Coil / CDi-Unit
  • Wiring harness

    Fits on;
  • Puch Maxi
  • Puch Z50 / ZA50
  • Puch Monza
  • Puch X30 / X40

  • See images for sizes

  • Mounting tips:
    - The black wire of the CDI Unit must make a ground/mass connection with the engine block. This can be done directly (preferably) or indirectly via the frame.
    - With Zundapp, among others, the engine doesn't have a ground/mass connection with the frame, because it's mounted in rubbers. Therefore add an additional ground wire between the block and the frame.
    - With ground/mass connections to the frame, the mounting point must always be made bare/blank.

  • Additional Warranty Information
  • Normally there is no warranty on electronic parts.
  • In the unlikely event that this product does not work, it can only be returned with the following conditions:
  • Still new, never worked. If it has worked for a number of weeks, there is no guarantee.
  • In original packaging, complete as delivered.
  • With the original cables.
  • Ignitions with cut / added / soldered cables are not accepted

  • Why these warranty rules?
  • We and a number of regular customers test a lot of these ignitions. "Out of the Box" they all work.
  • It often goes wrong with the mass, wrong connection.
  • Check whether the spark plug sparks, if the spark plug makes no mass, ignition coil is immediately broken and so on.
  • Hence these rules.
We found other products you might like!
Reviews
No Reviews
Write Your Own Review
Your Rating
FAQ about this product
No Questions

Do you have a question?

Leave your question below and one of our experts will take care of you as soon as possible.