Front wheel Puch Maxi

Axle nut

• Wide
• 12MM

Axle nut

Wide
11MM

• Cover
• In stead of Speedometer driver
• Puch Maxi

Ascone Puch maxi.
For a spoked wheel.
11MM

A piece

• Ascone
• For a spoked wheel
• 12MM
• Puch Maxi
• A piece
  
  

• Dustring
• For spokewheels front & rear
• Puch Maxi

• Set Bearing Balls for wheel bearings with cups
• Per 144 Pieces
• Size; 3/16 / 4.7MM
• Puch Maxi

• Cup front & rear wheel
• Puch maxi spoked wheels
• A piece
• Outerdiameter 29MM

• Special wheel bearing
• To convert your original hub with loose balls to fixed bearings
• For star rim and spoke wheel hubs with inner diameter Ø 29MM
• Puch Maxi
• A piece
  
  Dimensions:
• Inner diameter: Ø 12MM
• Outer diameter: Ø 29MM
• Width: 8MM
  
  Tip:
• Ensure there is a suitable bushing between both bearings
• Install the bearing with locktite
• Use a 12MM axle
• Ream hole in brake anchor plate to Ø 12MM
• Please note, not for hubs that are intended for fixed bearings, these often have an inner diameter of Ø 28MM and use different bearings.

• Front wheel hub
• Model as Leleu
• With Brake anchor plate
• With fixed bearings
  
  Fitting for:
• Puch Maxi
  
  
• Without brake shoes, see products below

• Front wheel axle
• Puch Maxi
• A-Quality
• Fits on spoked wheels with separate cups
• Diameter 11MM ( M11X1 )
• Original length 155MM
  
  Contains:
• Ascones
• Wide nuts
• Small nuts
• Rings
• Bearing cups
• Sealing rings for dust cups
• Ball bearing set
  
  Note:
• Better threaded then other imitation sets
• Cups and Ascones made of hardened steel
• Grease!

• Front wheel axle
• Puch Maxi
• Fits on spoked wheels with separate cups
• Diameter 11MM ( M11X1 )
• Original length 155MM
  
  Contains:
• Ascones
• Wide nuts
• Small nuts
• Rings
• Bearing cups
• Sealing rings for dust cups
  
  Note:
• Bare steel, may have some superficial rust
• Grease!
• Thread not perfect, finishing may sometimes be necessary.
  
  

• Brake Shoes
• Puch Maxi
• Model Leleu
• Without springs

• Set brake shoes
• A-quality / Newfren
• Model Leleu
  Fits on;
• Puch Maxi

• Brake anchor plate
• Including brake shoes
• Diameter axle hole 11MM (Spoke wheel)
• Diameter Brake anchor plate 94MM
• For use with Star rim, drill axle hole diameter to 12MM
• Puch Maxi

• Spokes set
• Puch Maxi
• Inner and outer spokes
• 36 Pieces including nipples
• 187MM

Spoke + Nipple each

Puch Maxi

Moped Inner Tube

• 2.00 / 2.25 X 17.

you can use this for tires with the size;

• 2.00 X 17
• 2.25 X 17

• Tire
• Street profile
• Continental
• Type KKS10
• Size: 2.00 X 17
• Load index 22 ( 85KG / 187LBS )
• Speed index B ( 50KM / 31MPH )
• Tube Type (For use with inner tube)

• Tire
• Street profile
• Brand; Deestone
• Type D776
• Size; 2.25 X 17
• Load index 33 (115KG / 254LBS)
• Speed index L (120KM / 75MPH)
• Tube Type (For use with inner tube)

Speedometer driver

• Puch Maxi. ( VDO )
• For 12MM axle