Tankcure Information

Our Tank cure products:

Manual at the products descriptions.

Tank Cure Coating set 450 Gram      Tank Cure Epoxy remover     

Tank Cure Tankcleaner                   Tank Cure Rust Remover          

What can you achieve with our Tank Sealant?

   - Cure rusted tanks
   - Stop leakage through seams and pinholes
   - Preventive treatment against leaking seams, pinholes and the build up of rust
   - Shield off pollution in oil tanks (after sandblasting)

Treatment of the tank before application of Tank Sealant
In order to guarantee a good result you always have to do some preparation on your tank Before you apply the sealant the tank should be absolutely dry, free of grease and almost free of rust. "Tank Cure  has products that will assist you in the preparation of the tank.

   - Tank Cure Tank Cleaner
   - Tank Cure Tank Rust Remover
   - Tank Cure Epoxy Remover

These products form an ideal base before you apply our tank sealant. We will briefly highlight each product:

Tank Cure Tankcleaner

This is a strong claening fluid to degrease your tank. We advise to always use this product because it will guarantee a good adhesion of the sealant to the surface of the patrol tank. Especially if you apply the sealant in a tank for a two stroke engine it is nessesary to use the tank cleaner first.

Tank Cure Roest verwijderaar

Tanks with a rusted interior can be treated very succesfully with this product. We advise to use the Rust Remover if the inside of your tank is severely rusted.

Tank Cure Epoxy Remover

This product will remove all old layers of pait and/or sealants. Only use this product if you would like to apply a new sealant or if you plan to weld on your tank. You only need this product if you like to remove old layers of sealant or paint or if welding is needed on a tank that has sealant inside. For a motorcycle tank you will need 1/2 a litre of Tank Cleaner and 1/2 a litre of Rust Remover.